Company Guides

From NQT to offer: how TCS hires freshers in 2026

Krishna Naga Krishna Naga November 3, 2026 7 min read
From NQT to offer: how TCS hires freshers in 2026

TCS opened registrations for its All India NQT hiring drive on 18 February 2026, with tests from 10 March and a registration deadline of 20 March. That drive is closed now, but its page on tcs.com is still the most complete official description of the TCS interview process for freshers: who can apply, what the test looks like, and what each offer pays. We read it, and the TCS iON NQT page it relies on, on 31 October 2026. This guide is built from those two pages. Where something comes from candidate reports instead, we say so.

A quick map before the detail. For engineering freshers, the TCS interview process runs in this order: register on the NextStep portal and apply for the drive, sit the NQT at a TCS iON centre, get sorted into Prime, Digital or Ninja interviews based on your score, then interview, with document checks along the way. Experienced (lateral) hiring is a different route, covered briefly near the end.

Who can apply, according to TCS

The eligibility list is strict and TCS says it checks it “at every stage of the selection process”. For the 2026 drive it read:

  • Batches of 2024, 2025 and 2026 with a B.Tech, B.E, M.Tech, M.E, MCA, or M.Sc/M.S in any specialization, from an AICTE or UGC recognized institution.
  • At least 60% aggregate (or equivalent CGPA) in Class 10, Class 12, diploma if any, graduation and post-graduation if any. TCS converts CGPA to percentage by multiplying by 10, so a 7.2 CGPA counts as 72%.
  • No pending backlogs when you sit the selection process.
  • Course finished in the normal duration, full-time only. Total education gap of no more than 24 months, and you must declare it.
  • Up to 2 years of work experience allowed. Age between 18 and 28.

Two of these trip people up more than the rest. The first is the gap rule, because a drop year plus a delayed result can add up faster than you’d expect. The second is the “First-Class” clause: the offer is only valid if your degree certificate shows you cleared engineering in first class within the course duration.

TCS NQT: the test that decides which interview you get

This is the part most candidates spend their time on, and fairly so. TCS describes the NQT as an integrated test with two parts. Part A is the Foundation section and Part B is the Advanced section. TCS’s wording is that “Advanced section” is mandatory if you want a Digital or Prime offer, and that “based on the test performance, candidates will qualify for Prime, Digital or Ninja interviews.”

Section Minutes (per TCS)
Part A: Foundation 75
Numerical Ability 25
Verbal Ability 25
Reasoning Ability 25
Part B: Advanced 115
Advanced Quantitative and Reasoning Ability 25
Advanced Coding 90
Total 190

The test is in-centre at a TCS iON centre, not from home. You choose three preferred centres and three preferred job cities while applying. TCS doesn’t publish question counts or cut-offs on that page, so any number you see for those comes from candidates, and the counts quoted on prep sites don’t agree with each other.

Something that confuses a lot of applicants: there are two different things called NQT. The hiring drive above is TCS recruiting for itself. Separately, TCS iON sells an NQT score that other companies accept too. On 31 October 2026 the iON page listed Cognitive, IT, BFSI and Non Tech versions (₹599 for Cognitive, ₹999 for IT), said scores stay valid for 2 years, that there’s no pass or fail cut-off, and that “TCS iON will not arrange for any job interviews”. Its age range (17 to 30) is also wider than the TCS drive’s. If your goal is a TCS offer, follow the drive on tcs.com and the NextStep portal, not the paid iON listing.

For a section-by-section study plan, LastRoundAI has a longer TCS NQT preparation guide, so we won’t repeat it here.

Prime, Digital and Ninja: what the offers pay

TCS publishes CTC ranges for the drive, which is rare for a mass recruiter and useful, because the salary figures circulating on forums are often from older batches.

Offer 0 to 1 yr, UG 0 to 1 yr, PG 1 to 2 yrs, UG 1 to 2 yrs, PG
Prime ₹9.09 to 9.30 LPA ₹11.59 to 11.80 LPA ₹9.45 to 9.66 LPA ₹12.05 to 12.26 LPA
Digital ₹7.09 to 7.30 LPA ₹7.39 to 7.60 LPA ₹7.50 to 7.72 LPA ₹7.82 to 8.04 LPA

TCS adds that actual pay depends on experience and job location. The 2026 off-campus page lists no Ninja CTC, since that drive invited applicants for Prime and Digital, though the test can still route you to a Ninja interview. TCS describes the work differently too: Prime is “complex projects with advanced technologies and algorithms”, Digital is solution development and integration, and Ninja is application development and maintenance. For context on how these compare with other fresher offers, see our entry-level tech salaries for 2026.

Small mistakes that knock out TCS applications

TCS’s FAQ for the drive reads like a list of things that went wrong for earlier applicants. The ones worth knowing before you register:

  • Registering under the wrong category. Engineering applicants must create their profile under “IT”, not “BPS”. If you picked BPS by mistake, TCS asks you to email tcsbps.support@tcs.com to delete that profile before creating a new one.
  • Not clicking “Apply For Drive”. Registering on NextStep isn’t enough. TCS says that without this step “you will not be considered”.
  • Locking your account. Three wrong OTP attempts lock the NextStep account for 4 hours, and a further wrong OTP locks it until the next day. TCS recommends a desktop or laptop for registration.
  • Expecting a confirmation email. There isn’t one. The status “Applied for Drive” is the confirmation.
  • Applying with an existing offer. If you already hold a TCS offer, you can’t use the off-campus drive to upgrade it. TCS says it will announce upgrade opportunities separately.

None of this is hard. It’s just easy to miss when the registration window is about four and a half weeks long, as it was in 2026, and you’re also preparing for the test.

What happens in the TCS interview rounds?

TCS’s official page says very little here, and it’s worth being precise about what it does say: you’ll be “evaluated predominantly on the skill chosen” during registration, “in addition to the usual course of interview”, and your original documents are verified at the interview and again at joining. That’s it.

The rest is candidate-reported. Interview write-ups from recent batches describe three parts, sometimes run back to back in one sitting and sometimes merged:

  • Technical round (reported). Questions on your final-year project, the programming language you picked at registration, OOP, DBMS and SQL, and often one or two small coding problems. For Prime and Digital, candidates report harder data structures questions. Brushing up with our data structures for coding interviews guide and SQL interview questions covers most of what gets reported.
  • Managerial round (reported). Situational questions, team conflict, why TCS, and sometimes a scenario about a client deadline. Answers in the STAR format hold up well here.
  • HR round (reported). Relocation, night shifts, the service agreement if one applies to your offer, and a check on your documents and gaps.

We can’t confirm how many panelists you’ll face or how long each round runs. Reports vary a lot, and some candidates describe all three being folded into one conversation with a single panel. If anything, that variation is the useful finding: prepare for the content, not for a fixed number of rounds.

Our opinion, which you’re free to disagree with: the project discussion decides more TCS interviews than the coding question does. A fresher who can explain why they chose one database over another for their own project usually comes across better than one who solved the coding question but can’t describe what they built. Practise a two-minute explanation of your project out loud, more than once.

The TCS interview process for experienced candidates

Lateral hiring has its own page on tcs.com and doesn’t go through the NQT. Candidates with experience report a technical round focused on the role’s stack, a managerial round and an HR discussion. TCS doesn’t publish a fixed structure for it, and it’s driven by the specific opening, so read the job description closely.

Two official warnings apply to everyone. TCS says it never asks candidates to pay money at any stage, and that it doesn’t send hiring emails from Gmail, Yahoo, Rediffmail or Hotmail addresses. Its helpdesk for the NQT drive is ilp.support@tcs.com.

A short checklist before your TCS interview

  • Original marksheets for Class 10, 12, diploma and degree, plus semester marksheets showing no backlog.
  • A one-line explanation for any education gap, with documents.
  • Your NextStep status showing “Applied for Drive”. TCS says there’s no separate confirmation email.
  • A practised answer to “tell me about yourself” that ends on your project.
  • Revision of the language you selected at registration, since that’s what TCS says you’ll be tested on most.

If you want to rehearse the spoken parts, Craqly’s practice mode will run mock HR and technical questions against your own resume. After the interview, results can take a while, and our piece on how long it takes to hear back explains what silence usually means.

The one number from this page worth memorising isn’t a salary. It’s 60%, because no amount of NQT preparation helps a candidate who misses the aggregate.

Krishna Naga

Written by

Krishna Naga

Writes about hiring processes at large tech companies and how candidates can prepare for them.

Scroll to Top